Dell Mini 1018 Forum for discussion on the refreshed Dell Mini 1018, released Q3 2010.

Thread Tools Display Modes
  (#1) Old
Fichtenelch Fichtenelch is offline
Junior Member
Posts: 9
Join Date: Dec 2010
Location: Near Frankfurt, Germany
Default Touchscreen 1018? - 12-12-2010, 11:11 PM

just wanted to ask if anyone ever did an upgrade to his dell inspiron mini 1018 to a touchscreen.

However, i did it in the last 2 days, i just finished troubleshooting (accidentally changed a wire) and it is working so far. But i will have to cut the bezel, since the touch-overlay i used is made of glass and adds another 2-3mm on top of the screen.
(ebay item 270665308841 is the screen i used, from seller visualtouchworld)
I will test if i get it working on linux and will report. Actually i did take some pictures during modification, but after i was finished i found the memory card was not in the camera at this time...

However, this is my first post, so hello everyone
Reply With Quote
  (#2) Old
rrfranczak3 rrfranczak3 is offline
Super Moderator
rrfranczak3's Avatar
Posts: 2,902
Join Date: Aug 2009
Location: Upstate New York, U.S of A.
Send a message via AIM to rrfranczak3 Send a message via MSN to rrfranczak3 Send a message via Yahoo to rrfranczak3
Cool 12-13-2010, 01:09 AM

I have not heard of it being done.....but hey if it works for you...congrats...this is not something I would wanna hack mine apart for but to each his own I guess....Good Luck....

Welcome to the forum....

Dell Mini 10 (Obsidian Black 1010), 2gb RAM, 1.66ghz 533mhz FSB (Z530) processor, A10 BIOS, 1 Terabyte (1000 GB) WD Scorpio Blue Hard Drive (5400rpm), Intel GMA 500 Integrated Graphics, TV Tuner, Bluetooth 2.1 module with EDR, 1.3mp Camera, 1366x768 HD Screen, Wireless 1510 b/g/n mini card, 6 cell (56WHr) Battery, 4gb SDHC, 64gb Flashdrive, Targus Netbook Chillpad, Targus Sport Case, Windows 7 Ultimate SP1 (500gb)/Windows 8.1 (500gb) (Dual Boot)

iPad 4 (64gb) w/Retina,Targus Versavu Case
Reply With Quote
  (#3) Old
Fichtenelch Fichtenelch is offline
Junior Member
Posts: 9
Join Date: Dec 2010
Location: Near Frankfurt, Germany
Default 12-13-2010, 01:02 PM

This is how it looks at the moment..

And here is the youtube

I did loose 1 usb port due to the controller beeing soldered internally to it and i will have to cut the bezel....
Reply With Quote
  (#4) Old
reflex reflex is offline
reflex's Avatar
Posts: 1,997
Join Date: Apr 2009
Default 12-13-2010, 04:01 PM

Good luck

Mini 9 | Intel 5100 Wifi | Ubuntu 10.04 Netbook
Mini 1012 | SSD | Intel 6200 Wifi | Ubuntu 11.10 64bit
Reply With Quote
  (#5) Old
Fichtenelch Fichtenelch is offline
Junior Member
Posts: 9
Join Date: Dec 2010
Location: Near Frankfurt, Germany
Default 01-31-2011, 08:59 PM

Is there a place to post a Guide? I don't have any pictures from the modification, but it isn't that complex if you have all the bits and pieces. However, i just post a small text-only Guide.

First thing you need is a touchscreen kit, i bought mine on ebay and the multi-touch ones are available for around 90-120$. There is also usually a wiring guide included.
Second thing, there is a Dell Service Manual available which tells you how to take everything apart.

At first you need to remove the battery, after that loosen all the screws on the bottom.

Then you pull the keyboard in the direction of the screen and carefully open the flexprint cable. You need a small piece of plastic (i used the disassembly-set for mobiles, available for ~2$ on dealextreme with worldwide free shipping) and you have to carefully open the latches around the top bezel. once loosened, you need to carefully open up the flexprint for the touchpad.
after that you see all the nice guts and have to open a couple of more screws on the l/h side which hold the assembly containing the harddisk and on the r/h side a silver cover over the ram. remove the harddisk and remove the assembly preventing you to access the usb-port on the l/h side. (you could also use the right one, but i decided to take one of the left ones, since they were closer to the controller).
you also will need to disconnect the wifi-antenna-cable from the wifi-card.

Remove the two black stickers which hide the screws of the screen bezel and take them out.
Now you need to be really careful and open the latches around the screen bezel and remove the front bezel.
then open all the screws (4e/a) around the screen, remove the cable from the webcam. you will also need to unscrew the 2 monitor hinge screws. i also removed the small bezel on the rear side of the screen (above the battery) and there are also 2 more screws, but i'm not 100% sure if these are needed.

Once you got the whole bezel away from the screen you can fit the overlay foil. if you bought the same kit i purchased, then you have to flip the driver board on the back of the screen and make sure to isolate it with tape to prevent it from short circuit.
once you're done with the connectors and the tape and got everything in place, pull the wire through the screen hinge and then solder them to the usb port of your choice. check the wiring twice, i had mine completely assembled and my device was not recognized, because i had a wire changed. (data - and GND interchanged).
Getting the bezel to fit the screen again might be a pain, i'm still not done on mine...

However, the Dell Manual does help and there is also a small guide telling you how to connect the driver board to your usb port. i mechanically blocked my usb port to prevent short circuit/driver trouble. there are also boards available with usb hubs included, but you need more wires then.

However, once everything is in place, put it all back together and touch your screen
Reply With Quote

« Previous Thread | Next Thread »
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Copyright © 2008-2016