General Mac OS X Discussion General Apple and Mac OS X Discussion

Reply
 
Thread Tools Display Modes
  (#111) Old
is44c is44c is offline
Junior Member
 
Posts: 18
Join Date: Sep 2009
Default 11-24-2009, 12:31 PM

Quote:
Originally Posted by joeltje View Post
As promissed, I've started a How-To, can you please check and give comments? It's still initial, and I still need to include some screenshot I guess...

What you need:
1. USB Hard-disk
2. Mouse, either usb or Bluetooth!
3. Chameleon 2 RC3 with installer
4. files from DarylZero ( http://www.mydellmini.com/forum/gene...tml#post118486 ) remove the file "sleepenabler.kext" from the \extra folder
5. OSX Snow Leopard Install DVD (Buy one!!!!)
6. DSDT-Patcher ( DSDT gui patcher from PCWIZ | iHackintosh )
7. Script bcm43xx_enabler.sh (google it, no direct link on hand)
8. Superduper ( SuperDuper! )
9. Kexthelper b7 (http://cheetha.net/)
10. Driver for the LAN Network-Card Realtek "RTL8102EL LAN" (Realtek or google)

Preparation:
1. connect the USB Hard Disk to you Mac
2. On your Mac Computer, open diskutility
3. Select the external Harddisk (The disk, not any of the partitions on the disk)
4. Go to Partition, create 2 partitions (1 minimum 8 gyg called "Install" and 1 larger called "OSXDell"). Make sure that you partition them as "GUID" in options, and format to HFS+
5. Now you will see two partittions in diskutility.
6. mount the SnowLeopard install DVD, it should also show in diskutility
7. Select the partition "install" of your externall Harddisk, and click recover
8. Select the SnowLeopard install DVD as source, and select partition "install" as target.
9. click recover (this takes time!)
10. When done, the external recovery of the SnowLeopard install DVD should mount.
11. Double click on the Chameleon installer.
12. install Chameleon on both the partitions on your external HD. Be carefull, and make sure you do not install on your Mac's Harddisk!!!
13. Copy the files (all except "sleepenabler.kext") to both partitions:
/boot
/DSDT.aml
/Extra
14. unmount harddisk from you Mac.
15. On you Dell Mini10, create a partition for SnowLeopard, preferably Journaled.

Install Step 1:
1. Connect usb to your Mini10
2. Turn Mini10 on, on logo screen press F12, to select the USB disk to boot from
3. after Chameleon loads, you'll have a couple of seconds to press enter to see more options. select disk SnowLeopard install DVD and press enter.
4. Now the install dvd should start, it runs like regular OSX installer. once you can select the disk to mount to, select the second partition on the external Harddisk "OSXDell"
5. Installation starts (This takes time!!) After Reboot, again, press F12 on Dell Logo, hit the enter on time, and now select the "OSXDell" to boot from.
6. The system should now boot from the freshly installed SnowLeopard on your External Harddisk. You'll need to go through the initial set-up of OSX.
7. When that's done, check if in disk utility you can see the internal harddisk of your Mini10. If so, check that it is partitoned to journaled. If not, do that.
8. open Superduper, and copy the complete "OSXDell" to your internal Mini10 partition. (again, this takes time!)
9. Now install Chameleon to the internal Mini10 Disk, to which you copied "OSXDell". When done, restart Mini10, remove USB Disk and let it boot from harddisk.
10. Chameleon should now start. It should automatically select the partition you copied your "OSXDell" to, if not, press enter to see more options, and select your OSX partition
11. Your Mini10 should now boot to OSX.

Install Step 2:
1. When running in OSX, connect USB Disk to Dell Mini10, this should open the SnowLeopard install DVD
2. Open Kexthelper b7
3. drag all .kext files from folder /extra on your "SnowLeopard install DVD" in the Kexthelper, enter your password and hit "easy install"
4. when done, disconnect USB and reboot. (this takes a long time, do not shut down manually. I had to wait over 20 minutes for OSX to actually shut down!)
5. It should again reboot to you OSX partition on your Mini10 through Chameleon
6. when in OSX, start DSDT-Patcher. Select Darwin/OSX as operating system, and select the partition that has OSX installed. Click "Run".
7. When done, reboot again.
8. Back in OSX, open terminal, and type "sudo " (including space at the end, excluding " ). drag the bcm43xx_enabler.sh file in the terminal and hit enter. follow instructions in the terimanl (if you want to be quick, just hit enter 4 times)
9. Reboot when this is done.
10. install the Driver for the LAN Network-Card Realtek "RTL8102EL LAN"
11. when done, reboot.





That should be it... 2 things that I still have not been able to fix are:
  • the screen resolution (I'm on a standard screen Mini10, and only get 800x600)
  • sound is not working form me...
A special thanks to 4 members here, for the time invested in this:
darylzero
adamtj09
meklort
mrkcee
absolutely no thanks to me, I just followed their lead
Guys, the link below points to a simpler guide with the great Netbook Bookmaker from Meklort.

It doesn't give you sound or sleep or BT though on Mini 10.

netputing.com • View topic - Dell Mini 10 and Mini 12 Snow Leopard Guide with NBI

Edit: Update the Netbook Bootmaker that has audio works on Mini 12. Need to repair permissions of boot disk after installation to make Audio work! Thanks to DarylZero's dsdt.aml!
Dell Mini 10-Mini 12 NetbookBootMaker 0.8.3 RC4.zip
Reply With Quote
  (#112) Old
adamtj09 adamtj09 is offline
Member
 
Posts: 39
Join Date: Nov 2009
Default 11-24-2009, 03:57 PM

for the sound it works intermittently for me did you remove appleHDA and replace it with voodoo HDA? randomly it starts working when i reboot ! i think im gonna stick with win 7 until the 800x600 problem is sorted out as it limits uses of apps and the internet is difficult to use with the resolution making the browser pretty small! apart from that its amazing and once that last problem is fixed ill be one of the first to use os x on my mini 1010 regularly!
Reply With Quote
  (#113) Old
mrkcee mrkcee is offline
Member
 
Posts: 31
Join Date: Nov 2009
Default 11-24-2009, 03:59 PM

@joeltje

Great Job on the guide

@everyone

Could you guys post your dsdt.aml and ioreg -lw 0 output?


Dell Mini 10: Snow Leopard 10.6.1 | BIOS: A11
Reply With Quote
  (#114) Old
darylzero darylzero is offline
Member
 
Posts: 33
Join Date: Aug 2009
Smile busy updating.... - 11-24-2009, 06:43 PM

was a little busy..but tried to do some change to kext involved
replaced openhaltrestart with this OSXRestart.kext from here
OSXRestart.kext - InsanelyMac Forum
works better than the pystar1,remember delete openhaltrestar.kext and replace wth OSXRestart.kext,drag extension folder to kext utility and male new extension.mkext
next tried FakeSMC v2.5 but gave KP,but replace fakesmc.kext with this
CPU temperature in iStat - InsanelyMac Forum
what it does is give u cpu temp in stat which was not there before
also some dsdt modding..
congrts to joeltje
Reply With Quote
  (#115) Old
bigsexy408 bigsexy408 is offline
Junior Member
 
Posts: 11
Join Date: Nov 2009
Default 11-24-2009, 08:11 PM

dang so we need a mac for this, i dont have one =(
Reply With Quote
  (#116) Old
adamtj09 adamtj09 is offline
Member
 
Posts: 39
Join Date: Nov 2009
Default 11-24-2009, 09:37 PM

Quote:
Originally Posted by is44c View Post
Guys, the link below points to a simpler guide with the great Netbook Bookmaker from Meklort.

It doesn't give you sound or sleep or BT though on Mini 10.

netputing.com • View topic - Dell Mini 10 and Mini 12 Snow Leopard Guide with NBI


Dell Mini 10-Mini 12 NetbookBootMaker 0.8.3 RC4.zip
tried this there before i headed back to win7 and it got to the installer and the "this mac must be restarted" error message appeared i dont know what exactly is worng!some kext missing or somethin?
Reply With Quote
  (#117) Old
mrkcee mrkcee is offline
Member
 
Posts: 31
Join Date: Nov 2009
Default 11-25-2009, 01:41 AM

@darylzero
What mods did you do to your DSDT?

@bigsexy048
Nope you don't need one


Dell Mini 10: Snow Leopard 10.6.1 | BIOS: A11
Reply With Quote
  (#118) Old
darylzero darylzero is offline
Member
 
Posts: 33
Join Date: Aug 2009
Red face Audio Mod - 11-25-2009, 03:42 AM

Mod to add audio into dsdt

Replace (HDEF) in the dsdt 2

Quote:
Device (HDEF)
{
Name (_ADR, 0x001B0000)
OperationRegion (HDAR, PCI_Config, 0x4C, 0x10)
Method (_DSM, 4, NotSerialized)
{
Store (Package (0x04)
{
"layout-id",
Buffer (0x04)
{
0x0C, 0x00, 0x00, 0x00
},

"PinConfigurations",
Buffer (Zero) {}
}, Local0)
DTGP (Arg0, Arg1, Arg2, Arg3, RefOf (Local0))
Return (Local0)
}

Field (HDAR, WordAcc, NoLock, Preserve)
{
DCKA, 1,
Offset (0x01),
DCKM, 1,
, 6,
DCKS, 1,
Offset (0x08),
, 15,
PMES, 1
}
}
and place after Method (_WAK, 1, NotSerialized)

Quote:
Method (DTGP, 5, NotSerialized)
{
If (LEqual (Arg0, Buffer (0x10)
{
/* 0000 */ 0xC6, 0xB7, 0xB5, 0xA0, 0x18, 0x13, 0x1C, 0x44,
/* 0008 */ 0xB0, 0xC9, 0xFE, 0x69, 0x5E, 0xAF, 0x94, 0x9B
}))
{
If (LEqual (Arg1, One))
{
If (LEqual (Arg2, Zero))
{
Store (Buffer (One)
{
0x03
}, Arg4)
Return (One)
}

If (LEqual (Arg2, One))
{
Return (One)
}
}
}

Store (Buffer (One)
{
0x00
}, Arg4)
Return (Zero)
}
Remember 2 remove AppleHDEF.kext from System/Lib/Ext
i did this on my dell mini 10 and removed Apple hdef sound works microphone internal works also headphones works
Pls try always make a backup of ur dsdt in root before u do after which use kext utility 2 repair permissions
Reply With Quote
  (#119) Old
mrkcee mrkcee is offline
Member
 
Posts: 31
Join Date: Nov 2009
Default 11-25-2009, 04:15 AM

@darylzero
Ok.. will try that later.

Hmm.. I downloaded your current dsdt.aml and decompiled it.. but I didn't see that mod there. You changed it again?

EDIT:
AppleHDEF.kext? Do you mean AppleHDA.kext?


Dell Mini 10: Snow Leopard 10.6.1 | BIOS: A11
Reply With Quote
  (#120) Old
is44c is44c is offline
Junior Member
 
Posts: 18
Join Date: Sep 2009
Default 11-25-2009, 06:28 AM

Quote:
Originally Posted by adamtj09 View Post
tried this there before i headed back to win7 and it got to the installer and the "this mac must be restarted" error message appeared i dont know what exactly is worng!some kext missing or somethin?
Have you tried the modded Netbook Bootmaker I've uploaded? The original netbook bootmaker won't work. You need the VAIOPEnabler.kext that comes from Ryu123. I have included the necessary kexts in this netbook bookmaker so that you don't need to manually add them. Alternatively I can also mod the netbook bootmaker to include only the kexts from Darylzero if that works better for you.

is44c
Reply With Quote
Reply

« Previous Thread | Next Thread »
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Copyright © 2008-2016 MyDellMini.com.