[CultofMike]

Hi guys,

My wife mistakenly did a full update of her Mini 10v through Software Update. Now when the machine starts, it's stuck in a reboot loop. Safe Mode doesn't work.

We have a Time Machine backup.

Any ideas on how I can boot up and apply NBI, or is there a better method?

[r6680jc]

Press and hold shift on booting, when on the chameleon boot screen, type: recovery=y and hit enter.

[CultofMike]

When I press and hold shift, the system beeps, then again enters the reboot loop.

[Spokeshacker]

Look at this thread..it worked for me
http://www.mydellmini.com/forum/gene...8-ruh-roh.html

[CultofMike]

Thanks. Out of curiosity, how do I install the item if I can't boot into the system?

[r6680jc]

Originally Posted by CultofMike

Thanks. Out of curiosity, how do I install the item if I can't boot into the system?

Try to press and hold the shift key after the bios DELL logo disappear.

[CultofMike]

I can hold down shift, and I get the boot screen. I can type Recovery=y, but then the system reboots and again goes into the boot loop. I wonder if it's just time to reformat and reinstall?

[Qagak]

Hhmm... Well, let's see....

It's been a long time since I used recovery=y, so I was stumped myself.

1. Hold shift.
[at the boot screen or immediately after the screen with the Dell logo]


2. On the screen with your hard drive name, type:

recovery=y & hit enter

3. Wait for OSX to load.


I did it on a Mini 9. (Hopefully it works all the same on a 10v.) Anyway, the system took a while to load, so I typed recovery=y again, but it had already worked the 1st time.

OSX loaded, & I was in there. Thank goodness. :-)


________________________________________

Please DON'T DO the following as it will not work!

What I was doing wrong before: Getting to the screen with my hard drive name on it, pressing the down arrow, selecting boot, typing recovery=y & getting stuck in the reboot loop.... DUH! XD

[moxiepurple]

I was stuck in a loop too, I tried everything I could think of, couldn't get into safe mode and could not get the computer to boot up from the SD card that had my OSX install on it until I pressed F12 at the Dell logo screen, that let me open up the SD card, and I was finally able to re-install OSX, rebooted the computer and everything was back to normal. Hope that helps.

[spangyou]

I am stuck in boot loop as well with my Dell Mini 10V (1011) but holding shift does nothing. Everything was working fine and completely updated to 10.6.8 when on a normal restart I am stuck in boot loop. Any ideas how I can get back into OS X and fix boot issue?