My Dell Mini Forum

liltisay · **Unable to change boot sequence using f5/f6 -** 04-18-2012, 02:28 PM

The PXE-E61 error suddenly showed up on my mini 9 and I've been trying to change the boot sequence but it won't move? I wanted to atleast try to restore. Any ideas?

holmes4 · 04-18-2012, 09:54 PM

Sounds as if your CD is not bootable. Make sure that "Legacy USB" is enabled in the BIOS.

liltisay · 04-19-2012, 03:59 AM

It is enabled but f5/f6 doesn't do anything. Very frustrating

lswartz · 04-19-2012, 10:43 AM

Use 0 to select boot sequence right after you power up. You can just keep taping 0 until you get the boot menu. If you are using a USB CD plug it in right next to the power plug.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

liltisay Junior Member Posts: 6 Join Date: Apr 2012	Unable to change boot sequence using f5/f6 - 04-18-2012, 02:28 PM The PXE-E61 error suddenly showed up on my mini 9 and I've been trying to change the boot sequence but it won't move? I wanted to atleast try to restore. Any ideas?

holmes4 Super Moderator Posts: 5,965 Join Date: Nov 2008 Location: New Hampshire	04-18-2012, 09:54 PM Sounds as if your CD is not bootable. Make sure that "Legacy USB" is enabled in the BIOS. Steve Mini 9\|2GB RAM\|64GB RunCore\|Intel 5300\|Windows 8

liltisay Junior Member Posts: 6 Join Date: Apr 2012	04-19-2012, 03:59 AM It is enabled but f5/f6 doesn't do anything. Very frustrating

lswartz Senior Member Posts: 414 Join Date: Mar 2009 Location: Maryland	04-19-2012, 10:43 AM Use 0 to select boot sequence right after you power up. You can just keep taping 0 until you get the boot menu. If you are using a USB CD plug it in right next to the power plug. Dell Mini 9 \| Ubuntu 10.04 Netbook LTS \| 2 GB RAM \| 4 GB SSD \| BIOS A04

» Search Site
Advanced Search