Dell Mini 9 Discussion Discussion on the Dell Inspiron Mini 9.
| ||Thread Tools||Display Modes|
Join Date: Jul 2009
08-30-2009, 01:15 AM
Thanks for the info! I had searched the forum & hadn't found any thing. Where are these threads?? In the meantime, I will go look again + look up the user you mentioned. I checked the guides section where there is info on the parts & there was nothing there about the size.
~sigh~ I did use a #0 like you said in Runcore SSD Upgrade Guide (w/Pics) . That's the only reason I bothered attempted to remove the screws in the 1st place. (I knew exactly what to use.)
I got out the screws on the back panel, one screw from the SSD, the screws on the WLAN card & some other screws on the Mini. When they were tough, a needle-nosed pliers helped greatly with no problems.
I don't know how I could still end up not being able to get the screw out when I used the proper tools. Maybe I should have tried Frearson bits instead of Philips? I don't know....
Thanks again! :-)
Join Date: Nov 2008
Location: New Hampshire
08-30-2009, 12:26 PM
Mini 9|2GB RAM|64GB RunCore|Intel 5300|Windows 10
Join Date: Jan 2009
08-30-2009, 11:36 PM
Here is my thread for the screws: http://www.mydellmini.com/forum/sale...ve-screws.html
I am out of town, however, until after the holiday. The biggest advantage to my screws is the very deep head, which allows the driver to sink in further providing more contact area.
Copyright © 2008-2016 MyDellMini.com.