My Dell Mini Forum

pastrychef · 05-16-2012, 07:14 AM

Does anyone have a copy of the PDF created by Joe Pace? I tried PMing him, but I don't think he visits anymore. Thanks in advance.

jmacie · 05-16-2012, 04:26 PM

Here you go, I wanted to try, I found the parts, just didn't have the guts.

https://www.dropbox.com/s/ucxrnyc7c1o0h03/10v.zip

I'd ask you to keep me posted, but I know that's low percentage. Good luck!

pastrychef · 05-17-2012, 07:42 AM

Thank you very much for the PDF. I'll have to track down a socket and look for a bit of assistance with soldering it in place from my friend. So it will be a while before I actually get it done. However, I'll definitely return with results once done.

jmacie · 05-17-2012, 03:17 PM

I might give it a try if you could post some instructions on the soldering. There has to be a simplified way to do this tedious process. Let us know.

Joe Pace · 08-21-2012, 09:04 AM

There is no simplified was of soldering the socket that i know of, matter of fact mine stop working after a while most likely due to cold solder joint and vibration. I read somewhere that someone had a complete motherboard schematic, does anyone have it? I saw several other jumper points, and am wondering if the relate to the functionality of this slot?

crawwrm · **Mini 10v 2nd PCI-E slot -** 03-09-2013, 04:15 AM

I have a mini 10v that I am interested in adding a second PCI-E slot to. I just created my account so I cannot PM Joe.
Does anyone have his PDF file? And does it contain any more info than the fact that J3 needs to be jumpered to enable the slot?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

pastrychef Junior Member Posts: 12 Join Date: Jan 2010	05-16-2012, 07:14 AM Does anyone have a copy of the PDF created by Joe Pace? I tried PMing him, but I don't think he visits anymore. Thanks in advance.

jmacie Senior Member Posts: 186 Join Date: Dec 2009	05-16-2012, 04:26 PM Here you go, I wanted to try, I found the parts, just didn't have the guts. https://www.dropbox.com/s/ucxrnyc7c1o0h03/10v.zip I'd ask you to keep me posted, but I know that's low percentage. Good luck!

pastrychef Junior Member Posts: 12 Join Date: Jan 2010	05-17-2012, 07:42 AM Thank you very much for the PDF. I'll have to track down a socket and look for a bit of assistance with soldering it in place from my friend. So it will be a while before I actually get it done. However, I'll definitely return with results once done.

jmacie Senior Member Posts: 186 Join Date: Dec 2009	05-17-2012, 03:17 PM I might give it a try if you could post some instructions on the soldering. There has to be a simplified way to do this tedious process. Let us know.

Joe Pace Junior Member Posts: 9 Join Date: Jul 2011	08-21-2012, 09:04 AM There is no simplified was of soldering the socket that i know of, matter of fact mine stop working after a while most likely due to cold solder joint and vibration. I read somewhere that someone had a complete motherboard schematic, does anyone have it? I saw several other jumper points, and am wondering if the relate to the functionality of this slot?

crawwrm Junior Member Posts: 1 Join Date: Mar 2013	Mini 10v 2nd PCI-E slot - 03-09-2013, 04:15 AM I have a mini 10v that I am interested in adding a second PCI-E slot to. I just created my account so I cannot PM Joe. Does anyone have his PDF file? And does it contain any more info than the fact that J3 needs to be jumpered to enable the slot?

» Search Site
Advanced Search