[ppafford]

NBI 0.8.3
BIOS A06

Started off great, on first try I reformatted the drive and started the installation. Said about 30 minutes left then KP with about 27 minutes to go.

Restarted the computer and now it wont boot from USB. I have tried all three, any thoughts? Do I need to downgrade the BIOS? never had a problem like this before and this is my 3rd 10v I've done this to.

Looking for any advice, thanks

---------- Post added 03-12-2010 at 12:01 AM ---------- Previous post was 03-11-2010 at 11:35 PM ----------

Going to upgrade to NBM/NBI 0.8.4pre and see how it goes. I did get it to boot from the USB from time to time so it might be the old image I have on the USB.

Will post details in the morning

---------- Post added at 12:07 AM ---------- Previous post was at 12:01 AM ----------

Checking my old files I think I made the image using NBM 0.8.2, could this be an issue with BIOS A06?

[minimalpc]

Yes, 0.8.2 did not support A06. That came late in the 0.8.3 cycle.

[Montala]

You certainly shouldn't have to downgrade your BIOS if you are using the latest version of NBI.

[ppafford]

NBM/NBI 0.8.4pre worked, booted right up and installed without a flaw