ok... i bought a flexible touchscreen off ebay (0.4mm thick) it fits under the bezel fine, no bulge, you've got to understand that with all touchscreen mods there's 2 parts to the touchscreen 1) the touchscreen itself 2) the controller card
i've internally soldered the controller card onto the right hand side usb port and it works fine
the only problem is, i've got the 1012 with all the shebang (i.e. TV card, high res screen etc) and there is no where to put the controller card; right now the controller card is dangling outside of my ram slot
i got a few options, what i can think of atm is
1) remove the tv card and put it there (definitely not doing this, digital TV rocks even with the crap antenna dispite what everyone one else says)
2) remove the right hand side speakers and put it there, (probably the most likely thing i'll do)
3) extend the wires from the touchscreen and the wires from the usb port and have the controller card sitting externally (probably in a box at the bottom of the 1012 mini)
anyone know where i can get a 5x20x50mm box?