-I soldered a 3,9mm slot under the palm-rest and I belive that the 5,9mm doesn't fit, the space is very short. 5,9mm fits next to WiFi.
-Soldering tips from me would be about what NOT TO DO, since I just presed the hot iron on the 3,9mm slot's pins while they where located carefully over the pads of the motherboard in the place where the TV tuner slot should be originaly placed. I used an iron with some solder on it for the first pin, so it "sucked" all the solder from the motherboard's pad, later I tried to repaire it adding some solder but I'm not sure if it does contact now. Even later I realised that SMD soldering needs flux and diferent technique. I am not the right person to tell more about soldering.
-Is Broadcom HD accelerator similar to the IntelTurboMemory? After some research I conluded that ITM is not compatible whith 1010's chipset but I could be wrong. Most eBay sellers I asked told me the same, one told me that ITM works in WWAN slot whitch has USB interface like the TV slot, but there is always the chipset issue. Even if you just have to put it in the WiFi slot it has to be half-size miniPCI-e card(see my profile's picture if your 1010 is not diasembled), you must find a USB interface WiFi card(there is at least one, I can't find it now) and change the antena wires with other longer(screen cover must be removed to do this). I didn't bought an ITM because of the chipset problem, even if I could use it in the TV slot I already soldered.
-I putted an SSD
in the TV slot and it didn't work. I supose the reason was that the slot has only USB interface, as others also mentioned in this site. Of course better soldering of pin#1(used to start the device) would make me more sure, but anyway... I 'm sad to tell that 1010 is made for NOT taking any miniPCI-e SSD in EXCEPT if you put a USB interface WiFi card in the TV tuner slot with longer antena wires and find a real half-size(not so-called) SSD to put in the WiFi slot or find a USB interfase SSD(slower?) and put it in the TV slot.
I belive that's all from me in this thread, hope DKJones96 will have better news, cheers!